Brian Barton
Infectious Polluted Oxygen Vents are a type of geyser that produces polluted oxygen, which acts as the primary vector for Slimelung germs and can cause Food Poisoning. Polluted oxygen is breathable and works similarly to oxygen, sustaining wild and tame Pufts, and allowing Duplicants to survive. However, breathing too much of it causes the Yucky Lungs debuff, increasing the air consumption rate and causing coughing. While some players choose to seal off these vents, others utilise the oxygen by converting it into liquid oxygen, which kills the germs, or by using it to power Steam Turbines.
Explore related products
What You'll Learn
Sealing the vent off from your base
Sealing off vents in your home can be a great way to improve energy efficiency and save on energy costs. However, it's important to note that sealing off vents can also throw off the balance and pressure in your HVAC system, making it less energy-efficient and potentially causing damage. Therefore, it is recommended to consult an expert before sealing off any vents.
- Turn off the HVAC system.
- Remove the vent cover.
- Inspect the plenum box (the box to which the air vent is attached) and look for any existing sealant or gaps between the plenum and the drywall.
- Carefully remove any old sealant using a utility knife or sealant-removing tool.
- Clean the area with a damp cloth or a specialized cleaning solution to remove any dirt, debris, or grease that could prevent the new sealant from adhering properly.
- Apply a thin bead of caulk or duct sealant between the ducting and the sheetrock to fill in any cracks or seams. If the crack is large, use an expanding foam, being cautious as it can be messy and difficult to remove.
- Apply weather stripping or aluminium window screen to the edges of the underside of the vent to further prevent air infiltration and create a tighter seal.
- Reattach the vent cover and turn on the HVAC system once the sealant has completely dried.
It is important to note that this process may vary depending on the specific type and location of the vent (e.g., floor, ceiling, or wall vent). Additionally, sealing off too many vents can cause damage to the system by increasing pressure, so it is generally recommended to seal only supply vents and not return vents.
How Factories Pollute: The Dark Side of Manufacturing
You may want to see also
Explore related products
![KwikSafety - Charlotte, NC - EAGLE EYES, HAMMERHEAD, OWL Welding Goggles [ANTI-FOGGING ANTI-SCRATCH] ANSI Tested OSHA](https://m.media-amazon.com/images/I/814LLpkHetL._AC_UL320_.jpg)
Using it for clean oxygen
Polluted Oxygen Vents are a type of vent that releases polluted oxygen, which is dirty, unfiltered air that contains harmful germs known as Slimelung. While polluted oxygen is breathable and can sustain life, prolonged exposure can lead to negative health effects such as the Yucky Lungs debuff, which increases the air consumption rate and causes coughing. Therefore, it is important to use the oxygen from these vents carefully and purify it before use.
One method to obtain clean oxygen from an Infectious Polluted Oxygen Vent is to utilise its two weaknesses: cold temperatures and being cleaned to pure O2. By creating a LOX (Liquid Oxygen) plant, you can turn the polluted oxygen into liquid oxygen, which effectively kills the germs and converts it into clean oxygen. This process involves cooling the polluted oxygen to its condensation point, turning it into a liquid, and then reheating it back into clean oxygen gas. This approach allows you to take advantage of the full output of the vent while ensuring the oxygen is safe for use.
Another strategy is to use deodorizers and cold temperatures to purify the oxygen. You can pipe the polluted oxygen into gas tanks located in a frozen biome, which helps kill the germs due to the low temperature. After that, you can direct the oxygen through a corridor filled with deodorizers to ensure any remaining impurities are removed. This two-step process of cooling and deodorizing helps ensure the oxygen is safe and breathable.
Additionally, you can use the polluted oxygen to sustain a Puft farm. Pufts are creatures that consume polluted oxygen and produce slime, which can be useful for various purposes. By containing the Pufts in a controlled environment, you can utilize their ability to process the polluted oxygen while also benefiting from their slime output. This approach can provide a sustainable source of clean oxygen while also generating valuable resources.
It is worth noting that Polluted Oxygen Vents have a relatively low output, and the oxygen they produce can heat up the surrounding area if not properly managed. Therefore, it is important to consider the ventilation and temperature control of the area where the vent is located. Proper sealing and ventilation can help prevent the build-up of heat and ensure the oxygen is directed where it needs to go.
Sparrow's Habitat: Impact of Pollution
You may want to see also
Explore related products
![KwikSafety - Charlotte, NC - EAGLE EYES, HAMMERHEAD, OWL Welding Goggles [ANTI-FOGGING ANTI-SCRATCH] ANSI Tested OSHA](https://m.media-amazon.com/images/I/81rdg26ObDL._AC_UL320_.jpg)
Liquidating PO2 to turn it into liquid oxygen
To turn Polluted Oxygen (PO2) into liquid oxygen, you can create a LOX plant. This process involves liquefying the PO2, which turns it into liquid oxygen. This liquid oxygen will eventually turn back into clean O2, and any slime lung present will not be able to survive the state transitions.
One way to do this is to pipe the PO2 into gas tanks inside a frozen biome to kill the germs. The cold temperature will help eliminate the germs. After this step, the oxygen can be deodorized and then directed into your O2 supply.
Another method is to seal the infectious polluted oxygen vent in a large room with a long corridor leading to a cold area. The corridor can be filled with deodorizers so that by the time the oxygen reaches the end, it is no longer polluted. The cold temperature will also help eliminate any germs.
The liquid oxygen produced can be utilized for various purposes, such as supplying clean oxygen or even creating liquid polluted water. Additionally, it can be used in a Puft farm, where the Pufts will consume the polluted oxygen and produce slime, which can be used for infinite mushrooms.
How Eelgrass Holds Pollutants: Nature's Filter Explained
You may want to see also
Explore related products
Using it to power steam turbines
Infectious polluted oxygen vents release at 500 degrees. While these vents can be sealed off, they can also be used to power steam turbines. Steam turbines are the primary device for harvesting power from heat, and they can do this very well as long as the temperature of the steam passing the turbine is kept high. The steam below the generator must be at least 125 °C / 257 °F for the turbine to function and produce power.
Infectious polluted oxygen vents can be used to generate this required heat. The steam turbines will need some form of cooling as they will get hot quickly. The steam vent outputs +500 °C steam, and the steam turbines will generate power as long as the steam is above +125 °C. The steam turbines will also generate +95 °C water.
The steam turbines can be placed above the vent, within a vacuum chamber with insulated walls. The steam turbines will need liquid pipes to direct the water to where it needs to go.
Using super coolant is approximately 23 times more efficient than using water or polluted water as a coolant in a steam turbine. The steam turbine will continue to run and consume its power source unless turned off manually or by automation.
How Pollution Impacts Sunlight and Earth's Climate
You may want to see also
Explore related products
Using it to grow mushrooms
Growing mushrooms involves creating the right environmental conditions for fungi to thrive. Mushrooms require a continuous supply of fresh oxygen to grow and release carbon dioxide. Therefore, adequate air circulation and exchange are critical for successful mushroom growth.
Infectious polluted oxygen vents can be used to support mushroom growth by providing a source of oxygen. However, the output of oxygen from these vents is typically low, and the oxygen produced is polluted and may contain germs that can cause infections, such as Slime Lung.
- Seal the vent: In the early stages, it is advisable to seal the vent to prevent the spread of pollution and germs.
- Deodorize and cool the oxygen: Use a tunnel or corridor filled with deodorizers leading away from the vent to remove pollutants. The length of the corridor ensures that by the time the oxygen exits, it is no longer polluted. You can also run the gas pipes through a small pit of water to cool the oxygen. Alternatively, trap wild Wheezewort inside the vent, as they will naturally take care of germs and cooling.
- Convert polluted oxygen to clean oxygen: To make the oxygen suitable for mushroom growth, you can liquidize the polluted oxygen (PO2) and turn it into liquid oxygen, which will then turn back into clean O2, free of germs.
- Provide adequate air circulation: Use fans to maintain proper air exchange and ensure a continuous supply of fresh oxygen for mushroom formation. Fans also help expel carbon dioxide, maintain optimal temperatures, and prevent the accumulation of contaminants like mold and bacteria, which can hinder mushroom growth.
- Utilize by-products: The infectious polluted oxygen vent can also be used to support a Puft farm. Pufts eat polluted oxygen and produce slime, which can be used as fertilizer for mushrooms.
By following these steps and maintaining the right environmental conditions, you can use the infectious polluted oxygen vent to create a thriving ecosystem for mushroom cultivation.
Onondaga Lake: Pollution's Lingering Legacy?
You may want to see also
Frequently asked questions
An infectious polluted oxygen vent is a type of geyser that produces polluted oxygen, which is dirty, unfiltered air that can spread Slimelung and Food Poisoning germs.
Breathing too much polluted oxygen can cause the Yucky Lungs debuff, which increases the air consumption rate and causes coughing. It can also cause food nearby to rot at a faster rate.
There are several ways to mitigate the risks: sealing it off from your base, using deodorizers to clean the air, liquefying the polluted oxygen, or exposing it to cold temperatures to kill the germs.
Yes, you can utilize the oxygen from the vent by first treating it to kill the germs. This can be done by piping the oxygen into gas tanks inside a frozen biome or by creating a LOX plant to liquefy the oxygen, which will turn back into clean O2.
Yes, the oxygen can be used to feed Pufts in a Puft farm, which will then produce slime. This slime can be used to create infinite mushrooms.
